Are you new to JustMommies? Start here and introduce yourself!
Welcome to the JustMommies Message Boards.
We pride ourselves on having the friendliest
and most welcoming forums for moms and moms to be! Please take a moment
for free so you can be a part of our growing community of mothers.
If you have any problems registering please drop an email to firstname.lastname@example.org.
Our community is moderated by our moderation team so you won't see spam or offensive messages posted on our forums. Each of our message boards is hosted by JustMommies hosts, whose names are listed at the top each board. We hope you find our message boards friendly, helpful, and fun to be on!
The resistive touch screen is composed of two electrically coated sheets of certain material separated by a small gap.
The two resistive circuit layers are coated on one side by transparent metal oxide coating (Indium tin oxide ITO) and these two layers are separated by insulating dots to avoid electrical contact in idle state. When touch pressure is applied to the top resistive layer, it flexes back towards the second layer and an electrical contact is produced at the corresponding point and the circuit is completed. A voltage is produced in both layers, one layer voltage is used to detect the horizontal location of touch and other layer voltage for vertical location of touch. On the backside of all this scheme is an electronic control circuit which detects the location of touch point and passes the data to the touchscreen controller on which the touchscreen software acts and produces the output which is the effect of our touch on screen. Resistive touch screen require pressure to complete a touch effect and one can anything such as finger, pencil, pen etc. to register a touch on resistive touch screen